Hi-Lite Aluminum Fly Forms multiply the benefits of our system. The bigger, higher and more complex the project, the more Hi-Lite design helps you complete it on-time and under-budget

• Ideally suited for multiple stories, large bay structures, bridges, overpasses and tunnels.
• Significantly reduces crane time
• Telescopic feature easily adjusts for differing floor heights
• Modular components reduce skilled labor cost
• Light-weight and easy to handle means increased productivity

Read More about Aluminum Fly Forms

The Hi-Lite 12k Aluminum Shoring Frame System has a capacity of up to 11,000kg (24,000 lb.) per frame using a safety factor of 2.5. The 4’ by 6’ frame weighs less than 14kg (30lb.)

• No more than 1/3 the weight of the comparable load bearing steel frame.
• Loads as high as 13,800 kg (30,000 lbs) can be supported with a safety factor of 2.0.
• Designed to replace traditional 20K steel frame shoring and other modular systems.
• Inter-bracing feature helps maintain full load capacity in high towers.
• Snap-on Jet Locks make erection and dismantling fast, easy and safe.

Read More about 12KIP Aluminum Shoring Frames

The Modular Aluminum Shoring Frame, an innovation we designed over thirty years ago, is now an industry standard all over the world.

• Single person handling and set applications in difficult areas.
• Snap-on Jet Locks make erection and dismantling fast, easy and safe.
• Capacity tested to safe working loads up to 22,700 kg (50,000 lbs) per frame with a safety factor of 2.5:1.
• Versatile components are interchangeable and adjustable to suit diverse applications.
• Transportation and handling cost are reduced because of their light weight and modular features. 

Read More about 10/16/25KIP Modular Aluminum Shoring Frames

Hi-Lite Aluminum Post Shores are engineered for quick and easy handling, require minimal maintenance and can be easy converted to shoring frames.

• Engineered for quick and easy handling.
• 50% of the weight of a comparable steel capacity shores.
• Minimal maintenance required.
• 4 Vertical T-bolt slots run the full length of the post shore.
• Post Shores convert to frames by adding demountable ledgers.

Read More about Aluminum Post Shores

By using Hi-Lite Aluminum Beams and Stringers in all your projects, you can reduce both labor and materials costs – in significant amounts.

• Eliminate up to 1/3 of the horizontal members and as much as ½ of the vertical supports, using aluminum beams instead of wooden ones.
• Reduced weight of each beam combined with fewer structural members minimizes worker strain. Lower worker fatigue means higher worker efficiency and lower costs.
• The greater the shoring height, the more these advantages benefit you.

Read More about Aluminum Beams

With the same load capacity at half the weight of steel, the Hi-Lite Bridge Overhang Bracket System reduces installation time – every time. 

• Can be spaced twice as far apart compared to equivalent steel brackets.
• Requires significantly less labor for installation and stripping.
• The Adjustment Rod can be easily and safely turned from above without going underneath.
• The aluminum resting bars are far less likely to damage the bridge girders.
• A Top Chord Extension can be used to lengthen the upper portion of the bracket.

Read More about Bridge Overhang Brackets

Versatile and cost-effective – if you like Hi-Lite products, you'll love the drop head system!

• Lighter and stronger than comparable systems.
• System supports 12" slabs with a 6’ x 8’ grid.
• Designed to accept infilling with standard 4 x 4 complete with 3 1/2” x 3 1/4” plywood strips.
• Unique features make erection and dismantling fast, easy and safe.
• Adapts to any post shores including Hi-Lite’s 10 KIP and 25 KIP modular legs or using a single 40 KIP post shore up to 24' in height.

Read More about our Drop Head Shoring System